V. - 🚀 First-time Setup and Accessing the ggRock Server Application

This guide provides step-by-step instructions for accessing the ggRock Server Application (ggRock Web UI) for the first time. The process involves logging in with a ggLeap account that has the necessary permissions and optionally changing the password for that account.

Table of Contents

Instructions

In order to install and set up ggRock we would need to complete following steps:

• https://ggcircuit.atlassian.net/wiki/spaces/GKB/pages/15860709/I.+-+How+to+Download+Debian+and+Rufus?atlOrigin=eyJpIjoiYzlkMTA3N2EwM2FjNDU4NWFhNGE1NGU2NTc5NTQwOGUiLCJwIjoiYyJ9
• https://ggcircuit.atlassian.net/wiki/spaces/GKB/pages/15860713/II.+-+Create+a+Bootable+Debian+Installer?atlOrigin=eyJpIjoiOWFjYTllYWMyNGRjNGZiODkxNDY1NjFiNzIyMWM3MGQiLCJwIjoiYyJ9
• III. - 🐧 Install Debian Linux
• https://ggcircuit.atlassian.net/wiki/spaces/GKB/pages/15861727/IV.+ggRock+Server+Application+Installation
• V. - 🚀 First-time Setup and Accessing the ggRock Server Application 🎯 You Are Here
• VI. - ⚙️ Configure the ggRock Array
• https://ggcircuit.atlassian.net/wiki/x/KQjy
• https://ggcircuit.atlassian.net/wiki/spaces/GKB/pages/15861795/VII.+-+Configure+Client+Machines+for+Network+Diskless+PXE+Boot?atlOrigin=eyJpIjoiODA0ZWViYzUzMjg0NGQwNTg5N2IwNWIzN2EzNWVjYWYiLCJwIjoiYyJ9

🖥️ Access the Server Console

1. Connect to the server via one of the following methods:

• Direct keyboard/mouse/monitor connection
• SSH
• Debian Control Panel

2. Retrieve the Server IP Address displayed on the login banner:

🔍 Note: Your Server IP will be unique to your LAN configuration.

🌐 Open the ggRock Server Web UI

3. On any PC within the same network, open a web browser and enter your Server IP. Press Enter.

🌟 Tip: It's recommended to use Chrome or Firefox for best results.

4. If you encounter a security warning, click "Advanced" and then "Proceed to [Your Server IP] (unsafe)":

🔐 Note: This is safe if you've followed official setup steps.

🔑 Log into ggRock for the First Time

• Navigate to your ggLeap Webadmin at https://admin.ggleap.com and log in with the credentials provided by your sales manager.
• Settings > Employees > Employees list

• Click "Add employee"

• Set a username and password
• Enable the permission "Can get GG rock AuthToken"

🛡️ Note: The first ggLeap account used in ggRock becomes the owner.

7. Log into the ggRock Web UI:

8. On first login, you’ll be prompted to change your password:

✅ Confirm Successful Login

9. You should see the Machines page (initially empty):

🎉 Congratulations! You've successfully accessed ggRock!

You may now proceed with the "Configure the ggRock Array" guide.

Updated on: 24/12/2025