📦I use a diskless boot (PXE) server, how do I upgrade ggLeap?

Many ggLeap customers use a PXE-boot server to push game-client and system updates.

Follow these steps to update your ggLeap client image.

---

Prerequisites ✅

• A PC configured as Superclient (with Keep Writeback enabled)
• “Can update client version” permission in ggLeap
• All other target machines powered off (recommended)

---

Step-by-Step Upgrade Guide

1. Enable Superclient Mode/Keep Writeback mode
   On one of your workstations, turn on Superclient mode/enable Keep Writeback.
   Note the machine’s name or ID—you’ll use it again.
2. Open Client Version Settings

• In the Dashboard, find your Superclient PC’s row.
• Click the three-dot Ellipsis ⋯ on the right.
• Choose Settings → Change client version.

3. Select Desired ggLeap Version

• The version page will load, with your Superclient already pre-selected.
• Click Change Version, pick the new version from the list, and click Apply.

4. Verify Upgrade on Superclient

• Allow the Superclient to reboot and finish updating.
• At the ggLeap login screen, confirm the version number in the lower-center area.

5. Save and Exit Superclient Mode

• Power off the Superclient PC.
• Disable Superclient mode, apply or save the writeback to your OS image.

6. Roll Out to Other Machines

• Power on the next machine (ensure it’s off before starting).
• Repeat Step 2 → Step 4 to update it to the same client version.
• Continue until all target PCs match the Superclient version.

---

Alternative Access

You can also reach the version settings via:

Settings → Client Configuration → Version

---

Important Notes ⚠️

• Version Consistency
  Always select the same version on every PC. Mismatched versions will cause boot loops.
• Machine Power State
  Turning off non-Superclient PCs before you start prevents premature update triggers.
• PXE Variations
  These steps apply to most PXE setups—your environment may differ slightly.

---

Required Permission:

• Can update client version

---